The Pro-Spray has been manufactured with the precision required to ensure reliable operation and peak performance for years to come. This solid performer boasts heavy-duty ABS construction, including an extra-thick body and cap. Exclusive body ribs make it easier to install, adjust, and service while also providing more stability for the sprinkler in loose soils. But brawn isn’t all this product offers. The sprinkler also features a user-friendly “pull-ring” flush cap that helps keep debris to a minimum and a multi-function wiper seal that eliminates flow-by. Add in its compatibility with all industry standard female nozzles–as well as Hunter’s own complete line-up of adjustable, fixed, and specialty nozzles–and you have the industry’s most sophisticated spray sprinkler. A spray designed with the professional in mind.
Designed for commercial spray systems, the PRS30 boasts an in-stem 2.1 bar regulator, providing optimal pressure to reduce water waste. Other features include a factory-installed check valve and the most powerful retraction spring in its class.
Calibrated at a consistent 2.8 bar, the PRS40 is designed for optimal performance when combined with the revolutionary MP Rotator. To maximize water efficiency at any site, the PRS40 and MP Rotator are a partnership that performs.
Heavy-duty body and cap construction
Multi-thread buttress design withstands the harshest environments.
Pressure activated, multi-function, no flow-by wiper seal
Easy to remove and clean; treated with UV inhibitors to ensure long life.
Compatible with All Female Threaded Nozzles
Accepts adjustable, fixed and specialty nozzles from Hunter and all major brands.
Optional factory-installed drain check valve for up to 10 feet elevation change
Eliminates landscape damage from flooding and erosion.
Ratcheting riser for quick arc alignment
Make adjustments while sprinkler is operating.
For positive retraction under any conditions.
Innovative pop-top flush plug design
Allows limited flow permitting controlled directional flushing.
1/2″ standard side inlet on 6″ and 12″ models
Installation convenience for deep seated bodies.
PROS-00 – Shrub
PROS-02 – 2″ Pop-up (5 cm)
PROS-03 – 3″ Pop-up (7.5 cm)
PROS-04 – 4″ Pop-up (10 cm)
PROS-06 – 6″ Pop-up (15 cm)
PROS-06NSI – (No Side Inlet) (15CM)
PROS-12 – 12″ Pop-up (30 cm)
• Overall height:
PROS-02 – 4″(10 cm)
PROS-03 – 5″ (12.5 cm)s
PROS-04 – 5 7⁄8″ (15.5 cm)
PROS-06 – 8 3/4″ (22.5 cm)
PROS06NSI – 8 3/4″ (22.5 cm)
PROS-12 – 16 1⁄8″ (41 cm)
• 1/2″ female inlet NPT
• Exposed diameter: 2 1/4″ (5.7 cm)
• Recommended pressure range: 15 to 70 PSI (1.0 to 4.8 bars; 103 to 482 kPa)
• Flow-by: 0 at 10 PSI (.7 bars; 68 kPa) or greater; .1 GPM (0.02 m3/hr; 0.4 l/min) otherwise
• Precipitation rates: approximately 1.5″ (38 mm) per hour
• Factory-installed drain check valve for up to 10′ (3 m) elevation change;
“Check Valve” stamped on cap for easy ID
• Field-installed drain check valve (part # 437400)
• Field-installed black rubber cover (part # 469805)
• Field-installed reclaimed water identification snapon cover (part # PROSRCCAP)
• Field-installed reclaimed water identification body cap (part # 458520),
with “Check Valve” stamped on cap for easy ID (part # 458525)
• Field-installed vandal-proof cap (part # PROS-VPC)
|EXAMPLE: PROS – 04 – CV – 15H|
00 = Shrub
02 = 2″ Pop-up
03 = 3″ Pop-up
04 = 4″ Pop-up
06 = 6″ Pop-up
06NSI = 6″ Pop-up No Side Inlet
12 = 12″ Pop-up
CV = Factory-Installed
Drain Check Valve
(Pop-up Models Only)
CV-R = Factory-Installed
Reclaimed Body Cap
8 = 8 Series
10 = 10 Series
12 = 12 Series
15 = 15 Series
17 = 17 Series*
A = Adjustable
Q = Quarter-Circle
H = Half-Circle
F = Full-Circle
Note: Bodies and nozzles sold separately. Also compatible with Hunter’s bubbler and specialty nozzles.
* 17 Series available in Adjustable, Half, and Quarter-Circle patterns only.
CV and CV-R models not available in 2″ or 3″ pop-ups.
(For further Information)